Recently Updated 1368

Newest Most upvoted
Section: All Snippets Scripts Reference Guides
dahdi set hwgain {rx|tx}

Sets the hardware gain on a given channel and overrides the value provided at module loadtime.

Reference cli
dahdi set dnd

Sets/resets DND (Do Not Disturb) mode on a channel.

Reference cli
dahdi restart

Restarts the DAHDI channels: destroys them all and then re-reads them from chan_dahdi.conf.

Reference cli
dahdi destroy channels

DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING.

Reference cli
dahdi create channels

dahdi create channels new - add channels not yet created For ISDN and SS7 the range should include complete spans.

Reference cli
corosync show members

Show corosync cluster members

Reference cli
corosync show config

Show configuration loaded from res_corosync.conf

Reference cli
corosync ping

Send a test ping to the cluster.

Reference cli
core waitfullybooted

Wait until Asterisk has fully booted.

Reference cli
core stop when convenient

Causes Asterisk to perform a shutdown when all active calls have ended.

Reference cli
core stop now

Shuts down a running Asterisk immediately, hanging up all active calls .

Reference cli
core stop gracefully

Causes Asterisk to not accept new calls, and exit when all active calls have terminated normally.

Reference cli
core show warranty

Shows the warranty (if any) for this copy of Asterisk.

Reference cli
core show version

Shows Asterisk version information.

Reference cli
core show uptime [seconds]

Shows Asterisk uptime information.

Reference cli
core show translation

as the chart is being displayed.

Reference cli
core show threads

List threads currently active in the system.

Reference cli
core show taskprocessors [like]

Shows a list of instantiated task processors and their statistics

Reference cli
core show taskprocessor name

Displays detailed information about a specific taskprocessor, including all queued tasks and their origins (DEVMODE only).

Reference cli
core show taskprocessor alerted subsystems

Shows a list of task processor subsystems that are currently alerted

Reference cli
core show sysinfo

List current system information.

Reference cli
core show switches

List registered switches

Reference cli
core show sounds

Shows a listing of sound files available on the system.

Reference cli
core show sound

Shows information about the specified sound.

Reference cli
core show settings

Show core misc settings

Reference cli
core show profile

show profile information

Reference cli
core show locks

This command is for lock debugging.

Reference cli
core show license

Shows the license(s) for this copy of Asterisk.

Reference cli
core show image formats

Displays currently registered image formats (if any).

Reference cli
core show hints

List registered hints.

Reference cli